- Heavy Duty Degreaser removes lubricating grease, cooking oil, fuel residue, and carbonised deposits from industrial surfaces
- Alkaline (water-based) degreasers are the safe choice for most industrial applications — no fire risk, lower toxicity
- Textile Machine Cleaner is formulated specifically for looms and spinning frames — safe for rubber seals and plastics
- Always allow dwell time before rinsing — scrubbing immediately after application reduces effectiveness
- Seamens supplies industrial degreasers in 5L, 30L, and 210L drums across Pakistan
Industrial grease contamination is one of the most common maintenance challenges in Pakistan's textile mills, food processing plants, engineering workshops, and commercial kitchens. Lubricating oil leaks, cooking fat build-up, hydraulic fluid spills, and grease-packed machinery components all require a degreaser formulated for the specific type of soiling and the surface being cleaned.
Choosing the wrong degreaser — or the wrong dilution — can mean either under-cleaning (leaving grease residue that attracts dirt and causes machinery failures) or over-cleaning (damaging rubber seals, stripping paint, or leaving corrosive residue on metal). Seamens Enterprises has supplied industrial degreasers to Pakistan's industrial sector since 1997.
Types of Industrial Degreasers
Alkaline Degreasers (Water-Based)
Heavy Duty Degreaser — Seamens' primary industrial degreaser. Alkaline formulation with high-pH surfactant system that saponifies fats, oils, and greases — converting them into water-soluble compounds that can be rinsed away with water. Applications:
- Plant floors contaminated with hydraulic oil or lubricant drips
- Machinery exteriors, frames, and housings
- Commercial kitchen floors, range hoods, and fryer exteriors
- Vehicle maintenance bays and workshop floors
- Food processing plant floors and equipment exteriors
- Loading dock areas and warehouse floors
Textile Machine Cleaner
A specialised degreaser formulated for textile machinery — looms, spinning frames, warping machines, and ancillary equipment. Unlike general industrial degreasers, Textile Machine Cleaner is formulated to be safe on the rubber seals, plastic components, and synthetic rope guides common in textile machines. Removes lubricating oil, size compound, fibre residue, and grease without attacking non-metal components.
Metal Surface Cleaner & Passivator
For precision metal surfaces, fabricated steel components, and ferrous metal parts that require degreasing before painting, coating, or welding. Contains a passivating agent that leaves a thin protective film on ferrous metal surfaces after cleaning — preventing flash rust before the next process step.
Application Guide by Industry
Textile Mills (Lahore, Faisalabad, Karachi)
- Weekly cleaning of loom frames and under-machine areas: Heavy Duty Degreaser at 1:10 dilution
- Spinning frame cleaning between doffing cycles: Textile Machine Cleaner at 1:5 dilution
- Annual plant shutdown deep clean: Heavy Duty Degreaser neat on encrusted areas with 20-minute dwell time
Food Processing Plants
- Floor cleaning in production areas: Heavy Duty Degreaser at 1:10 — rinse thoroughly before food production resumes
- Cooking equipment exteriors: Heavy Duty Degreaser at 1:5 on hot surfaces with PPE
- Note: Food contact surfaces require Food Grade Sanitiser, not Heavy Duty Degreaser
Engineering Workshops
- Workshop floor degreasing: Heavy Duty Degreaser at 1:5–1:10, scrub and rinse
- Metal parts degreasing before inspection: Metal Surface Cleaner & Passivator
Industrial Degreaser Selection Guide
| Application | Product | Dilution | Pack Size |
|---|---|---|---|
| General Plant Floors | Heavy Duty Degreaser | 1:10 — scrub & rinse | 30 / 210 L |
| Machinery Housings | Heavy Duty Degreaser | 1:5 — 10 min dwell — rinse | 30 / 210 L |
| Encrusted Grease | Heavy Duty Degreaser | Neat — 20 min dwell — rinse | 30 / 210 L |
| Textile Machinery | Textile Machine Cleaner | 1:5 — wipe & rinse | 5 / 30 L |
| Metal Parts Pre-coat | Metal Surface Cleaner & Passivator | Per label — wipe dry | 5 / 30 L |
| Kitchen Floors & Hoods | Heavy Duty Degreaser | 1:5–1:10 — scrub & rinse | 30 / 210 L |
Order Industrial Degreasers in Bulk
Seamens Enterprises supplies heavy duty degreasers and industrial cleaning chemicals in 5L, 30L, and 210L quantities to industrial plants across Pakistan. ISO 9001:2015 certified.
WhatsApp: +92-305-4444125 Request a Quote